|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join the 100 MPH ClubTM NOW! Bring your stock Yamaha GP1800 or GP1800R to us in South Florida and leave with it going 100+ MPH. Parts and labor included!
|
Join the 90 MPH ClubTM NOW!
|
Join the 80 MPH ClubTM NOW with a few easy-to-install upgrades! This performance kit includes an ECU flash, high flow air intake, and engine crankcase breather filter. Yes, it's that easy! Plus you'll have unlimited use of the full MaptunerX tuning library for the full lifetime of your watercraft, allowing you to upload any ECU tune anytime and anywhere!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: ALL Yamaha SVHO/SHO Watercraft 2008+
- Typical gains approx. 3 MPH Top Speed and 250-300 RPM
- Choose your blow off valve or add your own
- Increase throttle response and acceleration
CLICK TO LEARN MORE
|
Experience arm-stretching acceleration, blistering top speeds and instant throttle response with the Fizzle Z3 Supercharger Impeller! More torque and more horsepower = more fun!!
Weighing in at just 98 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!
Typical gains are 9 PSI more boost pressure and 600+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!
The Fizzle Z3 Supercharger Impeller will boost 27+ PSI @ 9500 RPM and will max out at more than 28 PSI at higher RPM levels.
We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
|
Unlock the performance of your Yamaha Waverunner by turning its potential into a reality! This tuning license is tied to your VIN and gives you unlimited access to the Riva Tuning library for your Yamaha. Easily switch between performance tunes and then back to stock settings if you wish. There are a number of tune files for many different levels of performance modifications.
The MaptunerX handheld tuning device used to load the tune into your ECU is sold separately. Bundle the MaptunerX with your tuning license for only $300 or rent our MaptunerX with a refundable $300 deposit. The MaptunerX tuning device can program more than 1 watercraft as long as a separate tuning license has been purchased for each additional watercraft.
System Requirements:
Windows based PC with Windows 7 or higher and a working internet connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Increase top speed, acceleration and throttle response with the Fizzle Z2 Supercharger Impeller! More torque and more horsepower = more fun!!
Weighing in at just 97 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!
Typical gains are 6 PSI more boost pressure and 400+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!
The Fizzle Z2 Supercharger Impeller will boost 24+ PSI @ 9300 RPM and will max out at more than 26 PSI at higher RPM levels.
We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
|
Applications: ALL Yamaha SVHO/SHO Watercraft 2008+
- Typical gains approx. 2+ MPH Top Speed and 200+ RPM
- Choose your blow off valve or add your own
- Increase throttle response and acceleration
CLICK TO LEARN MORE
|
The RIVA Super-Duty GEN-4 SHO/SVHO Supercharger Shaft Kit provides the ultimate in reliability for high boost applications. Kit features a revolutionary hydraulic shaft stabilization bearing that limits shaft deflection and wear. Bearing stabilizes end of supercharger shaft via high pressure oil film dramatically increasing the stability of the system. Hydraulic end bearing and one-piece shaft bearing are fed by a through-shaft oiling system providing superior lubrication. Oil is delivered by braided stainless line and injected into a billet end cap that houses hydraulic bearing. Shaft is precision machined from a single piece of high-strength billet steel producing shaft, collar & gear as one piece. This eliminates the common failure point on stock shafts where OEM gear is pressed onto shaft. Shaft also features larger diameter threads & nut for added strength. Kit includes new one piece bearing with increased surface area providing improved torsional stability of shaft. Bearing features superior materials & finish treatment for reduced friction & abrasion resistance. This Shaft & Bearing Kit is a direct replacement for OEM parts and requires no additional modifications for use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Supertech Yamaha set includes 16 retainers that are manufactured with high quality Military Certified Titanium Alloy and are CNC machined for a tight fit. Supertech set includes 16 single valve springs which are computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue. We also utilize computer software control. This combined with our high quality steel alloy enables Supertech valve springs to be more durable in extreme conditions. Supertech Set includes 16 Spring Locators that are manufactured from hardened 4140 Steel Alloy that not only protects the cylinder head casting and shim, but also precisely locates and holds the valve spring in place.
|
Applications: All Yamaha SVHO, SHO, and HO Watercraft 2009+
- Gain acceleration and top speed by choosing from levels 1 through 6 to match many different combinations of modifications
CLICK TO LEARN MORE
|
This Dean's Team Fuel Injector Kit is for high performance watercraft and delivers additional fuel to modified engines for high boost applications. These injectors are rated at 1,000cc (100-LB) per hour. The kit includes 4 injectors, plug and play adapters, and fuel rail bolts & spacers that make it compatible with stock and aftermarket fuel rails. Works with 2014 & newer Yamaha 1.8L WaveRunner models. Recommended for skis using the Fizzle Z1 or Z2 supercharger and compatible 100-LB injector tune.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Increase top speed, acceleration and throttle response with the Fizzle Z1 Supercharger Impeller! More torque and more horsepower = more fun!!
Weighing in at just 96 grams, this lightweight, precision machined billet aluminum supercharger packs a big punch!
Typical gains are 3 PSI more boost pressure and 200-300+ more RPMs over the OEM supercharger wheel and a more than 10% weight savings!
The Fizzle Z1 Supercharger Impeller will boost 21+ PSI @ 9100 RPM and will max out at more than 23 PSI at higher RPM levels.
This supercharger impeller is designed to give you that extra edge over a factory equipped ski.
We HIGHLY recommend an aftermarket heavy duty supercharger shaft kit be installed on any setup and especially when switching to a high performance aftermarket supercharger impeller, such as this one.
|
The new Solas Concord YV-CD-13/20 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. Works great with stock through Stage 2 modifications.
|
The new Solas Concord YV-CD-13/18 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. Ideal for stage 2 and stage 3 setups.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this TiAL 50mm blow off valve to relieve excess pressure during off-throttle situations to reduce supercharger clutch and gear wear. Reduce heat soak by releasing unused air in the charge tube. The body and all internal components are CNC-machined from 6061 aluminum alloy. Securely mounts with a V-Band clamp design. Valve seal utilizes a Viton O-ring that is clamped in place for maximum durability. Valve stem and guide are Teflon-lubricated and hard anodize-coated for wear resistance. Blow-off Valve also comes with a machined aluminum banjo-type air fitting and bolt with oversized 10mm hose barb for quick actuator response. INCLUDES 8 PSI SPRING. Included with TiAL Blow-Off Valve: - 50mm Valve Assembly with 8psi Spring
- V-band Clamp
- TiAL Air Fitting
- High Pressure Viton O-ring
|
Calas Performance Yamaha set includes sixteen retainers that are manufactured with high quality military certified Titanium alloy and are CNC machined for a tight fit. Retainers are extremely strong, lightweight and wear resistant. Retainers are made to fit OEM factory valve spring set.
|
The RIVA Intake Manifold Upgrade Kit enables your SVHO engine to produce more horsepower by delivering increased air flow and boost pressure (+1lb). Precision machined billet sleeve directly replaces restrictive mesh element that is prone to becoming dislodged in OEM plastic intake manifold. Provides improved low end punch and mid-range pull with improved reliability. Includes detailed installation instructions.
Key Features:- Delivers more boost pressure & horsepower.
- Improves reliability by removing OEM mesh that is prone to failure.
- Billet aluminum sleeve features o-ring design for positive seal.
- Includes hole saw & cutting fixture for clean installation.
Fits all Yamaha 2018+ SVHO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: ALL Yamaha SVHO/SHO Watercraft 2008+
- Add a blow off valve to your stock Yamaha intercooler!
- Choose your blow off valve or add your own
- Reduce back pressure on the supercharger wheel
CLICK TO LEARN MORE
|
Applications: ALL Yamaha SVHO/SHO Watercraft 2008-2017 - Beat engine and intercooler heat soak with this dedicated cooling line kit
- More consistent performance all day long
CLICK TO LEARN MORE
|
Applications: All Sea-Doo and Yamaha Intercooled Watercraft
- GIANT in size compared to many of the mainstream filters used by the jetski aftermarket.
- Stainless steel mesh filtering screen helps maintain water flow
- Helps prevent premature intercooler failure by keeping damaging debris out of the intercooler
CLICK TO LEARN MORE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This adapter allows easy installation of Blow-Off Valves, Fuel Pressure Regulators & Boost Gauges. Direct bolt-on design requires no drilling or modification of intake manifold. Includes one 1/8", 1/4" brass barbed fitting, 2 extra ports for various additional boost & vacuum accessories and block-off fittings for unused ports.
|
Applications: ALL Fizzle Y1000 and Fizzle 500 Intercoolers for Yamaha
- Add a flush fitting to your Fizzle Y1000 or Fizzle 500 Yamaha Intercooler
- Increase intercooler health and longevity
- This dedicated flush fitting is required after switching to a dedicated intercooler feed
CLICK TO LEARN MORE
|
***FREE ITEM Alert***
Applications: ALL Yamaha SVHO/SHO/HO Watercraft 2013-2017 - Gain up to 1 PSI of boost pressure
- Add this item to an existing order for no charge (FREE ITEM)
CLICK TO LEARN MORE
|
|
|
